Home | kswapmr2
Brought to you by Hux Racing, LLC A database of MR2 engine swap "How To's" and "DIY" info. Info Database Info Request Gallery
KswapSW20 FAQ | kswapmr2
Frequently asked questions for those considering swapping a k-series engine into a 91-99 SW20 MR2.
How To Directory | kswapmr2
K Swap Plug and Play Relay Wiring Conversion Prepping RSX K20 charge Harness for KSwap Prepping K20 Engine Harness for Kswap Fuel pump wiring Factory Dash/Cluster gauges Radiator …
Dash/Cluster functions and notes | kswapmr2
Please note: The wire colors and pin locations for these signals to the dash can be found in our SW20 chassis harness video: There are numerous examples of engine swap MR2 including k series with …
Kswap AW11 FAQ | kswapmr2
Frequently asked questions from those considering installing a k-series engine in an AW11
SW20 Drag Race Setup Information | kswapmr2
The rear weight heavy nature of the MR2 makes for a very uneasy feeling at anything less than "loaded" or acceleration conditions. The minimum amount of coasting felt between a clutched shift is enough …
K Series wiring and connector diagrams | kswapmr2
K-series Wiring and Connector info Basic 02-04 rsx k20 stand alone wiring diagram as supplied by Hondata.
SW20 Radiator Fan Control | kswapmr2
Perform Option 1 first. Then flip box over, pull off lower cover and cut wires to pin 3 , then wire pin3 to your fan control wire at ecu. This must be a ground trigger signal. Note: This wiring will work for any …
K Series O2 connector wiring info | kswapmr2
K-series O2 Wiring and Connector info Please note: Hux Racing DIY wiring kits already have O2 wiring in the relay panel. This info pertains to the Factory Primary O2 (wide band) 02-04 RSX K20 O2 …
Trobleshooting KPro Power Up | kswapmr2
This info is good for any ECU using RSX K series stand alone wiring. This page will be continually edited and added to. Need more help? Please contact us and we will add info to help. Kswap Da World …